
Tinymight 2 Black Walnut Edition Dry Herb Vaporiser
The Tinymight 2 Black Walnut Edition is the premium version of Tinymight's handcrafted Finnish dry herb vaporiser, pairing a solid American walnut body with black anodised aluminium. It keeps the same 70W pure convection heater and 3-second heat-up as the standard Tinymight 2, but upgrades the parts you use every day: a polished black zirconia stem, the redesigned Cooling Unit V2, on-demand boost and a direct-loading funnel, all supplied with a titanium dosing capsule and a travel case.
Key Features
- 70W pure convection heater, ready in approximately 3 seconds
- Polished 80mm black zirconia stem, far stronger than glass and cooler to the touch at high temperatures
- Cooling Unit V2, a redesigned single-piece stainless steel cooling unit that still lets you adjust the chamber size
- Boost available in On-Demand Mode as well as Session Mode, for a temporary temperature increase when you need it
- Stainless steel funnel in the top panel for loading flower directly into the device
- Titanium dosing capsule included for pre-loading
- Two heating modes: On-Demand, which heats only while the button is held, and Session Mode for continuous heat
- Temperature set with a numbered 1-10 dial on the base of the device
- Replaceable Molicel 18650 battery, so you can carry a spare
- USB-C charging, and can be used while charging
- Stealth mode to switch off the device's lights
- Packaging that doubles as a protective travel case
Important: Please Read Before Use
The Tinymight 2 runs on a removable 18650 lithium-ion battery. Only use a genuine high-drain 18650 cell, such as the supplied Molicel battery, and never use a battery with a damaged or torn wrapper. Store spare batteries in a protective case rather than loose in a pocket or bag.
What's Included
- 1 x Tinymight 2 Black Walnut Edition Vaporiser
- 1 x Polished Black Zirconia Stem, 80mm
- 1 x Cooling Unit V2
- 1 x Titanium Dosing Capsule
- 1 x Molicel P30B 18650 Battery
- 1 x Spare Parts Kit (O-rings and screen)
- 1 x USB-C to USB-C Charging Cable
- 1 x Carrying Pouch
- 1 x Instruction Manual
- 1 x Travel Case
Black Walnut Edition vs Standard Tinymight 2
| Standard Tinymight 2 | Black Walnut Edition | |
|---|---|---|
| Stem | 55mm quartz glass tube | 80mm polished black zirconia stem |
| Cooling Unit | Standard cooling unit | Cooling Unit V2, single-piece stainless steel |
| Boost Function | Session Mode only | Session and On-Demand Modes |
| Loading | Standard top panel | Stainless steel direct-loading funnel |
| Dosing Capsule | Not included | Titanium dosing capsule included |
| Packaging | Standard box | Doubles as a travel case |
| Finish | Natural walnut | Walnut with black anodised aluminium |
Technical Specifications
| Specification | Details |
|---|---|
| Activation | Button-activated |
| Device Type | Portable |
| Heating Method | Full convection, 70W |
| Heat-Up Time | Approximately 3 seconds |
| Temp Range | Session Mode: 140-230°C; On-Demand Mode: up to 250°C |
| Chamber Capacity | Adjustable, approximately 0.2g recommended maximum |
| Compatible Product Forms | Dry Herb only |
| Delivery Method | Direct draw |
| Battery | Molicel P30B 18650, removable |
| Battery Life | Not specified by manufacturer |
| Charging | USB-C (wall adapter not included) |
| Pass-Through Charging | Yes |
| Body Materials | American walnut wood, black anodised aluminium, stainless steel, zirconia |
| Dimensions | 88mm (H) x 61mm (W) x 37mm (D) / 3.5in x 2.4in x 1.5in (body only) |
| Weight | Not specified by manufacturer |
Why Choose the Tinymight 2 Black Walnut Edition?
The Tinymight 2 is already one of the most respected convection vaporisers available, and the Black Walnut Edition is Tinymight's answer to the question of how to make it better still. Every upgrade targets something you'll notice daily. The polished zirconia stem replaces glass with a material that's far tougher and stays cooler in the hand even at high temperatures, so there's no fragile tube to worry about in a pocket or bag. The Cooling Unit V2 is a single piece of stainless steel, simpler to clean and built to last, while still letting you set the chamber size. On-demand boost gives you an extra step of heat without switching modes, and the direct-loading funnel makes filling the chamber quick and tidy.
It also arrives ready for life on the move, with a titanium dosing capsule for pre-loading and packaging designed to double as a protective travel case. Handcrafted in Finland from solid walnut with black anodised aluminium, and backed by Tinymight's 3-year warranty, it's the most complete Tinymight 2 you can buy, and a device built to be used and enjoyed for years.
This device is sold strictly for use with prescribed medication only.
Caring for Your Dry Herb Vaporiser
These are general, basic care tips suitable for most dry herb vaporisers. Your device manufacturer's own care instructions may differ, always refer to the instructions supplied with your device where the two don't match.
- Remove the vaped material from the heating chamber after each session while the device and chamber are still warm, it comes out far more easily than once fully cooled.
- Don't clean the device itself while it's still warm, allow it to cool fully first.
- Clean glass parts separately from the main device using a resin-safe cleaning product.
- Replace screens and filters periodically, a clogged screen restricts airflow and affects flavour. Wear & tear replacement sets for most devices are available on our site.
- Avoid overpacking the chamber; tightly packed material restricts airflow and can cause overheating.
- Keep electrical contacts and charging ports dry, and avoid letting cleaning products near the battery compartment.
For the Black Walnut Edition specifically: the Cooling Unit V2 is designed for zirconia and metal stems. If you also use Tinymight's standard 55mm or 80mm glass tubes, pair them with the standard cooling unit rather than the V2.
Warranty
This product is covered by Tinymight's 3-year manufacturer warranty, which must be activated by registering the device with Tinymight. We provide direct warranty assistance for any valid claims raised within 6 months of purchase, simply contact us with a description of the issue, and we'll take it from there.
Troubleshooting
Having an issue with your device? Get in touch and we'll help sort it out. To speed things up, please have ready:
- A short video or photo clearly showing the fault
- A clear photo of the serial number (found on the base of the device)
Returns
Due to hygiene reasons, this device can only be returned for a full refund within 14 days of purchase if the seal is unbroken. Once the seal has been broken, the following rules apply instead:
- Within 30 days: the device can be returned for a full refund or replacement if it is faulty, not as described, or not fit for purpose.
- 30 days to 6 months: a faulty device can be repaired or replaced. We will work directly with Tinymight to facilitate this on your behalf.
- After 6 months: we will direct you to Tinymight's manufacturer warranty and can help facilitate this at our discretion.
Customers also bought
Orders placed before 3:30pm will be delivered the next working day. Orders placed after 3:30 PM will be dispatched on the next working day, and delivered the day after that.
Orders placed after 3:30 pm on a Friday and before 12pm on a Saturday will be dispatched on the Saturday. Delivery will be before 1pm on Monday*.
*Some people may receive orders before 1pm on the Sunday. This depends on where you live.
Orders to Scotland, Northern Ireland, and remote areas can take up to 2 working days to arrive.





